- Foscam ip camera setup on different network how to#
- Foscam ip camera setup on different network install#
They also block any plugins that may need to be installed to the web browser. These programs block the necessary web browser plugins from being executed by the web browser to properly view the video feed from the camera. Note: Disable any Pop Up Blockers which may be running on the web browser. There will be no password for this Access Point.Ģ) Open the Equipment Search Tool on the computer to search for the IP Address of the camera.ģ) Double click on the IP address of the camera to open the default web browser setup in Windows. Step 3: Connect the computer to the camera via the Soft AP being broadcast by the camera.ġ) Using the Wireless Networking indicator normally located on the lower right corner of the task bar use the computer to connect to the Wireless AP point broadcast by the camera. (Example: Fosbaby_xxxxx, C1_xxx) Also the status lights of the camera will quickly flash indicating it is in Soft AP mode. Release the button after 4 seconds the camera will announce the Soft AP mode is activated.Ģ) After the camera announces the Soft AP is activated the WAP within the camera will broadcast an unencrypted wireless signal with the model number of the camera.
Step 2: Activate the Soft AP (Access Point) mode of the camera.ġ) Locate the Soft AP button on the camera and press it for 4 seconds. These drivers can be found under the Device Manager and temporarily disabled. Oracle’s VirtualBox installs these drivers upon installation and they will prevent the software from accessing the LAN. Technical Note: BEFORE launching the program verify no virtual network drivers are installed on a Windows based computer. Note: Two versions of the Equipment Search Tool exist one for Windows and one for MacOS. Navigate the web browser to and download the Equipment Search tool.
Foscam ip camera setup on different network install#
Step 1: Download and install the Equipment Search Tool. This method will allow the user to directly connect to the camera on its own wireless access point.īefore proceeding with the connection directions verify the following is completed:Ģ) The computer/device is powered on and ready to connect to a Wireless Access Point.ģ) Maintain approximately 2-3 meters (6-10 feet) distance between the computer and camera. This covers the FosBaby series and the C1 cameras.
Foscam ip camera setup on different network how to#
Overview: This article will introduce how to set up a Foscam camera via the Soft AP process.
0 kommentar(er)
